what you’ll need:
1/3 yard of fleece
scraps of white felt
6″ strips of five different ribbons
to download pattern, click on pictures below. from flickr actions menu, select view all sizes. download at original size and print at 100% (to do this, you will most likely need to turn off scaling in your printer settings). match up pattern pieces, tape together, and cut out.
5. stitch around edges, leaving a space to turn. i’ve found it’s easiest to leave this space at the base of the tail (see below). after stitching around entire dino, go back and stitch again in the seam allowance where the ribbons are (just to make sure they’re extra secure).
6. trim seam allowance around the head, tail, and at the bottom of the legs (see above). clip curved areas and where the legs meet the body.
7. turn dino right-side out, stuff, and finish by slip-stitching the opening.